UV DTF stickers are designed for application on most smooth, hard surfaces. For best results, surfaces must be clean, dry, and free of dust, oils, or debris prior to application.
Each sticker includes a top transfer film and a bottom backing. These films are not part of the final sticker design and must be removed during the application process.
Peel off the top film. Set the sticker where you want it. You can reposition it before pressing. Use a credit card or similar to press it down good and firm. Rub deliberately to set design. Slowly peel off the remaining film and enjoy. If you notice any areas not lifting, place film back down and rub.
Once applied, UV DTF stickers are water-resistant, not waterproof. Care should be taken when washing items with an applied sticker. Hand washing is recommended. Avoid soaking, scrubbing, dishwashers, pressure washing, or prolonged exposure to moisture, as improper care may cause the sticker to lift or peel.
Proper surface preparation and gentle care are essential to maintain adhesion and longevity. These work best on hard surfaces i.e. wood, glass, acrylic, metal. UV flashlights can also be used to highlight over the sticker for additional adhesion, but this is not required.
Dogs:
UV DTF Sticker Application & Care Disclaimer
UV DTF stickers are designed for application on most smooth, hard surfaces. For best results, surfaces must be clean, dry, and free of dust, oils, or debris prior to application.
Each sticker includes a top transfer film and a bottom backing. These films are not part of the final sticker design and must be removed during the application process.
Peel off the top film. Set the sticker where you want it. You can reposition it before pressing. Use a credit card or similar to press it down good and firm. Rub deliberately to set design. Slowly peel off the remaining film and enjoy. If you notice any areas not lifting, place film back down and rub.
Once applied, UV DTF stickers are water-resistant, not waterproof. Care should be taken when washing items with an applied sticker. Hand washing is recommended. Avoid soaking, scrubbing, dishwashers, pressure washing, or prolonged exposure to moisture, as improper care may cause the sticker to lift or peel.
Proper surface preparation and gentle care are essential to maintain adhesion and longevity. These work best on hard surfaces i.e. wood, glass, acrylic, metal. UV flashlights can also be used to highlight over the sticker for additional adhesion, but this is not required.
***Small text and lineart needs to be applied slowly and carefully if it sticks to film, lay the film back down and rub deliberately to transfer.**
Image 1 of 11
Image 2 of 11
Image 3 of 11
Image 4 of 11
Image 5 of 11
Image 6 of 11
Image 7 of 11
Image 8 of 11
Image 9 of 11
Image 10 of 11
Image 11 of 11